Product Overview
Metered rack Power Distribution Units (PDUs) provide real-time remote monitoring of connected loads. User-defined alarms warn of potential circuit overloads before critical IT failures occur.
Explore APC Rack Power Distribution in 3D animation
APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using StruxureWare Data Center Expert, Operations, Capacity, and Energy Efficiency. New AP8000 series Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers
General Information
Name : APC AP7811B Rack PDU, Metered, 2U, 30A, 208V, (12) C13s and (4) C19 , APC by Schneider Electric
Category : Media Converters
UPC Code : 731304331490
Country of Origin : IN. Country of origin is subject to change.
Specifications
General Information
ADI Part Number : 2G-AP7811B
Brand Name : APC by Schneider Electric
Manufacturer : Schneider Electric SA
Manufacturer Part Number : AP7811B
Product Line : Metered Rack
Product Name : Rack PDU, Metered, 2U, 30A, 208V, (12) C13s & (4) C19
Product Type : PDU
Weight (Approximate) (g) : 3356.584
Technical Information
Output Voltage : 208V AC
Output Voltage (V AC) : 208
PDU Type : Metered
Plug/Connector Detail : 1
Receptacle Detail : 12 x IEC 60320 C13, 4 x IEC 60320 C19
Receptacle Type : IEC 60320 C13, IEC 60320 C19
Battery Information
Output Voltage (V DC) : 12, 24
Category Specific Attributes
Output Voltage (V) : 208
Physical Characteristics
Depth : 4.4"
Depth (mm) : 112.268
Height : 3.5"
Height (mm) : 88.392
Rack Height : 2U
Weight (Approximate) : 7.40 lb
Width : 17.5"
Width (mm) : 443.484
Power Description
Input Current : 4A
Input Current (A) : 30
Input Voltage : 230V AC
Input Voltage (V AC) : 230
Plug/Connector Type : NEMA L6-30P
Product Information
Mount Type : Rack Mount
Warranty
Limited Warranty : 2 Year
Miscellaneous
Country of Origin : IN
Environmental Certification : REACH, RoHS
Environmentally Friendly : Yes
Package Contents : <li>Rack PDU, Metered, 2U, 30A, 208V, (12) C13s & (4) C19 </li><li>Cord retention bracket(s)</li><li>Installation guide</li><li>Rack mounting brackets</li><li>User manual</li>
