Product Overview
The MIC1X module shall have a transformer-isolated, balanced input with XLR connector. It shall interface with low-impedance dynamic microphones. It shall also interface with electret condenser microphones and shall have an internal 24V DC phantom power supply to provide the bias supply that is enabled by a PCB jumper. The module shall have a gain control that will allow the gain to be adjusted from 28 dB to 62 dB. It shall have the ability to mute lower priority modules and be muted by higher priority modules. The module shall be able to assume any of 4 priority levels. The module shall have a VOX/gating circuit to control muting of lower priority modules and its internal gating circuit with controls for threshold and duration. It shall have a built-in limiter, with a threshold control, to limit the maximum output level of the module. A front panel LED will indicate limiter activity.
General Information
Name : Bogen MIC1X Microphone Input Module , Bogen
Category : Pro Microphones, Headphones & Headsets
UPC Code : 765368391169
Country of Origin : Taiwan, Province of China. Country of origin is subject to change.
Specifications
General Information
ADI Part Number : BO-MIC1X
Brand Name : Bogen
Manufacturer : Bogen Communications International, Inc
Manufacturer Part Number : MIC1X
NDAA Compliant : No
Product Model : MIC1X
Product Name : MIC1X Microphone Input Module
Product Series : MIC
Product Type : Microphone Input Module
Weight (Approximate) (g) : 102.058
Physical Characteristics
Color : Black
Depth : 3.5"
Depth (mm) : 88.9
Height : 3.1"
Height (mm) : 79.375
Weight (Approximate) : 3.60 oz
Width : 1.4"
Width (mm) : 34.925
Miscellaneous
Additional Information : <ul><li>Frequency Response: +0/-3 dB, 10 Hz-20 kHz</li><li>Priority: Four levels</li><li>Phantom Power: 24V DC (defeatable)</li><li>Connector: XLR</li></ul>
TAA Compliant : No
