Product Overview
ENFORCER Long-Range Barrier Sensors are ideal for protecting indoor or outdoor areas separated by long distances. They feature reliable photobeam technology with a choice of four programmable beam frequencies that provide superior perimeter protection by eliminating crosstalk and interference when multiple units are used. False alarms caused by animals, falling leaves, poor weather, or other sources are minimized by programming the alarm output trigger operation.
ENFORCER Long-Range Barrier Sensors work in even the most extreme conditions. A built-in heater automatically turns on and off depending on the outside temperature. An environmental control system senses a slow degradation in beam strength when weather conditions worsen to help prevent false alarms.
Installation and alignment is quick and easy with the ENFORCER Long-Range Barrier Sensors. They come with swiveling heads that allow them to be mounted along the same wall or on opposite walls, as well as provide for easy alignment of the beams between the transmitter and receiver.
- Weatherproof (IP65) for indoor or outdoor perimeter security
- Long sensor range up to 190ft (60m) outdoors, 380ft (120m) indoors
- Install on windows, doorways, skylights, fence tops, and any place where space is limited
- End caps swivel so sensor can be mounted on a single wall or on opposite walls with no L-bracket needed
- Programmable immediate trigger on simultaneous breaking of beams, or trigger after a single pair of beams is broken for at least 2 seconds
- Heater for use in cold weather operation
- Heater activates at 41ºF (5ºC)
- Terminal block wiring
- Slim design: 2-1/4" x 1-7/8" (55 x 49 mm)
- Rugged aluminum construction
- Built-in tamper switches, one on either end, trigger the alarm if end cap is removed
- No synchronizing wires required to align the beams
- Form C relay output
- LED and buzzer alignment indicators
- AGC (Auto Gain Control) circuits regulate beam signals in order to compensate for and ensure operation in rain, fog, and low-temperature conditions
- Programmable for 4 different frequencies to reduce interference between multiple units
General Information
Name : Seco-Larm E-9679-8B190Q Long Range Barrier Sensor, 8 Pairs of Beams , Seco-Larm
Category : Photoelectric Beam Detectors
UPC Code : 676544014515
Country of Origin : Taiwan, Province of China. Country of origin is subject to change.
Specifications
General Information
ADI Part Number : SL-E96798B19
Brand Name : Seco-Larm
Connectivity Technology : Cable
Manufacturer : SECO-LARM U.S.A., Inc
Manufacturer Part Number : E-9679-8B190Q
Product Model : E-9679-8B190Q
Product Name : Indoor/Outdoor Long Range Barrier Sensor, 190ft
Product Type : Photoelectric Beam Detector
Weight (Approximate) (g) : 6486.371
Technical Information
Horizontal Adjustment : 90°
Material : ABS, Aluminum, Polycarbonate
Maximum Indoor Detection Range : 380 ft
Maximum Indoor Detection Range (mm) : 115824
Maximum Outdoor Detection Range : 190'
Maximum Outdoor Detection Range (mm) : 57912
Maximum Response Time : 600 ms
Maximum Response Time (Second) : 0.6
Built-in Devices
Built-in Devices : Heater
Physical Characteristics
Depth : 3.1"
Depth (mm) : 79
Form Factor : Wall Mount
Height : 2.2"
Height (mm) : 55
Weight (Approximate) : 14.30 lb
Width : 1.9"
Width (mm) : 49
Power Description
Input Voltage : 24V DC
Input Voltage (V DC) : 24
Miscellaneous
Environmental Certification : ROHS
Environmentally Friendly : Yes
Features : Automatic Gain Control (AGC), Crosstalk Protection, Rugged, Weather Proof