DESCRIPTION
Camden Mounting Posts are available in 42" (107cm), with 36" (91cm) switch height and 48" (122cm), with 42" (107cm) switch height. There is a choice of extruded aluminum or stainless steel. They are available in clear aluminum and dark bronze anodized finishes and mill (suitable for painting). Posts are supplied with a flame and impact resistant ABS post cap, steel mounting base, and stainless steel mounting hardware. The post cap is designed for easy installation of Lazerpoint RF™ 915Mhz. wireless transmitter and battery pack.
An optional in-ground mounting base has re-bar welded to the base and is supplied CM-42-BSU-BRZ instead of the standard mounting base.
APPLICATION
Camden mounting posts offer a superior method of mounting a switch, keypad, card reader, or other door activation device, when mounting adjacent to the door is difficult or unsuitable. The various preps allow for use with virtually any switch or door activation device. Mounting posts are available in stainless steel or aluminum. Aluminum posts offer the option for mill, brushed aluminum or dark bronze anodized finishes. The mounting post has provisions to be hard-wired, or for wireless operation utilizing Camden radio controls
ARCHITECTS /ENGINEERS SPECIFICATIONS
The push plate switch mounting posts (bollards) used throughout the complex shall be Camden Door Controls CM-42 or CM-48 Series. They shall be 6" x 6" (152mm x 152mm) with 1/8" (3mm) wall thickness. The posts shall be 42" (107cm) or 48" (122cm) in height and accommodate any standard push plate switch. The post shall include a molded ABS flame and impact resistant cap with provision for 'snap in' wireless radio transmitter. Stainless steel posts shall be brush finished. Aluminum posts shall be mill, brushed aluminum or bronze aluminum finish. The mounting base shall be 3/16" (4.76mm) steel, secured to existing concrete pad with (4) 1/2" (12.7mm) anchor fasteners. Mounting posts are to be provided with in-ground concrete mounting base, where new concrete pad is poured.
